DE | EN

Options Dispense and Fill Heads

Manual turncocks

Manual turncocks in the Dispense and Fill Heads enable a variety of applications:

Configure it now!

  • Higher flow rates
  • No flow losses due to check valve
  • Can be used in both flow directions
  • Particularly suitable for:
    • very viscous or abrasive media (e.g. slurries)
    • chemicals with low boiling points.
      For example, ammonia solution can start to boil at higher temperatures and when powerful pumps are used (bubbles form). The turncock reduces the pressure loss in the suction pipe compared to Dispense Heads with a self-closing check valve.

Available in product lines

Turncock
QC2
QC3

Ball valve

G-Series

Flow rate (max)

50 l/min
Product line QC2

50 l/min

Product line QC3

150 l/min

Product line G-Series

Available Materials
Turncock

Same as Dispense Head body

Available Materials
Ball valve

PP
PVDF

Seals
Turncock

No additional seals needed

Seals
Ball valve

Standard
FKM

Alternative
FFKM (Kalrez®)
EPDM

Datasheet QC2 Turncock
Datasheet QC3 Turncock
Technical Information

Please visit our download center for further downloads and other languages. Resources > Downloads.

In this section we would like to show you videos about our products.

To make this possible, we ask you to agree to "targeting", which allows us to show you YouTube videos directly on our site.

Options

Ball valves with limit switch

Ball valves with limit switch

G-Series Dispense and Fill Heads with a ball valve can be optionally equipped with a multifunctional module, which allows signalling when the ball valve is in the correct position.

learn more →
Fill and Dispense Heads with Limit Switch

Fill and Dispense Heads with Limit Switch

Dispense and Fill Heads with built-in limit switch to signal the correct coupling with the dip tube.

learn more →
Fill Head with Mixing Nozzle

Fill Head with Mixing Nozzle

Fill Heads with mixing nozzles allow an homogeneous mixing of chemicals without additional mechanical stirrers.

learn more →
Fill Heads with integrated N2-blanketing port

Fill Heads with integrated N2-blanketing port

Fill Heads with additional second vent port allow nitrogen blanketing and filling of the container afterwards in a closed loop.

learn more →
QC2 Dispense Head, electrically conductive

Electrically conductive Dispense and Fill Heads

Dispense and Fill Heads made from elec. conductive plastics, allow a safe handling of flammable chemicals in potentially explosive environments.

learn more →
check resistance

This might also interest you

Docking station

Docking stations

Safe and reliable storage unit for Dispense and Fill Heads whilst changing containers.

learn more →
Check valves for ventilation

Check valves for ventilation

Safe pressure compensation during dispensing and prevention of outgassing after the pumping process has finished.

learn more →
Level measurement

Level measurement and overfill protection

Simple and clean level measurement and overfill protection on drum and IBC. Choose between the following options: Level Measurement: Capacitive and simple level measurement from ou
learn more →
Dual hose system PFA/PVC

Dual hose system PFA/PVC

  • Double safety due to PVC protective hose
  • More flexible and higher bending radius than PFA hoses
  • Also suitable for applications with dosing pumps
learn more →



Please visit our download center for further downloads and other languages. Resources > Downloads.